Structure
Outline
Thermocouple cable
Extension cable is a special wire used in the temperature measurement method of a thermocouple cable used by extending a wire made of the same material as a thermocouple to the measuring instrument terminal. In this case, since the thermocouple material is expensive, it requires a lot of cost to use it for a long time. Therefore, thermocouple cable made of relatively inexpensive materials with little error is needed, which is compensating cable.
In modern times, it is absolutely necessary to ensure economic feasibility with high efficiency by measuring and managing accurate temperatures, and to make the quality of products uniform and high-quality. In particular, it is widely used in all industrial sites that require heat management, from shipbuilding and automobiles to small boilers, in addition to various power plant facilities, process management of petrochemical plants, and steel smelters.
International color code by specification
Sensors | Types | Conductor Composition | Colors |
Positive | Negative | IEC 60584-3 | ANSI MC96-1 | JIS C1610 |
K | KX | Chromel | Alumel | 
| Green(+)White(-) Green(Sheath) | 
| Yellow(+) Red(-) Yellow(Sheath) | 
| Red(+) White(-) Blue(Sheath) |
KCA | Iron | Constantan |
| Green(+) White(-) Green(Sheath) |
| 
| Red(+) White(-) Blue(Sheath) |
KCB | Copper | Constantan | 
| Green(+)White(-) Green(Sheath) |
| 
| Red(+) White(-) Blue(Sheath) |
J | JX | Iron | Constantan | 
| Black(+) White(-)
Brown(Sheath) | 
| White(+) Red(-) Black(Sheath) | 
| Red(+) White(-) Yellow(Sheath) |
T | TX | Copper | Constantan |
| Brown(+) White(-) Brown(Sheath) | 
| Blue(+) Red(-) Blue(Sheath) | 
| Red(+) White(-) Brown(Sheath) |
E | EX | Chromel | Constantan | 
| Violet(+) White(-) Violet(Sheath) | 
| Violet(+) Red(-) Violet(Sheath) | 
| Red(+) White(-) Violet(Sheath) |
R | RCA |
Copper
| Copper-
Nickel alloy |
| Orange(+) White(-) Orange(Sheath) | 
| Black(+) Red(-) Green(Sheath) | 
| Red(+) White(-) Black(Sheath)
|
RCB |
| Orange(+) White(-) Orange(Sheath) | 
| 
| Red(+) White(-) Black(Sheath) |
S | SCA | Copper | Copper-
Nickel alloy |
| Orange(+) White(-) Orange(Sheath) | 
| Black(+) Red(-) Green(Sheath) | 
| Red(+) White(-) Black(Sheath) |
SCB | 
| Orange(+) White(-) Orange(Sheath) | 
| 
| Red(+) White(-) Black(Sheath) |
B | BC | Copper | Copper | | Gray(+)White(-)
Gray(Sheath) | 
| Gray(+) Red(-) Gray(Sheath) | | Red(+) White(-) Gray(Sheath) |
N
| NX | NICROSIL | NISIL | 
| Pink(+) White(-)Pink(Sheath) | 
| Orange(+) Red(-) Orange(Sheath) |
|
|
NC | Copper- Nickel alloy | Copper- Nickel
alloy | 
| Pink(+) White(-) Pink(Sheath) | 
|
|
|
* Note. All of our products are produced and managed in accordance with the international standard code and insulator usage regulations. Please contact our sales department for specifications other than the above products.
Characteristic table for each insulating material
Insulation symbol | Insulation material | Peripheral temperature range | Abrasion resistance | Flexibility | Acid resistance | Flame resistance | Water resistance | Moisture resistance |
V | PVC | -20∼105℃ | ○ | ◎ | ○ | ○ | ○ | ○ |
K | Silicone | -60∼200℃ | △ | ◎ | △ | △ | ○ | ○ |
F | Fluororesin FEP | -80∼200℃ | ◎ | ○ | ◎ | ◎ | ◎ | ◎ |
P | Fluororesin PFA | -80∼250℃ | ◎ | ○ | ◎ | ◎ | ◎ | ◎ |
G | Glass fiber | -20∼400℃ | Ⅹ | ○ | ◎ | ◎ | Ⅹ | △ |
C | CERAMIC FIBER | -200∼1,100℃ | Ⅹ | ○ | ◎ | ◎ | Ⅹ | Ⅹ |
*Option
ㆍCopper or SUS Braiding(Mechanical strength reinforcement)
ㆍAl-Mylar Tape shielding
ㆍDrain Wire(Earth)
Production range
Conductor Size Range | Solid Type | AWG 36 (0.127mm) ~ AWG 18 (1.0mm) |
Stranded Type | AWG 24 ~ AWG 14 (0.22SQ~2.0SQ) |
Multi-Pair Number | 2~37 Core, 2~37 Pair (Non UL) / 2~30 C, AWG 22~12 (UL) |
UL Approved | E314954(PLTC) -Fluororesin, PVC Type |
Thermocouple cable by type
ㆍFEP, PFA thermocouple cable - Used where heat resistance, chemical resistance, and water resistance are required - IEC-KX-FF-Conductor specification-1P Option : Shield, Drain etc. | 
| 
|
ㆍSilicone thermocouple cable for heat resistance - Used where heat resistance, flexibility are required - IEC-KX-KK-Conductor specification-1P Option : Shield, Drain etc. | 
| 
|
ㆍGlass thermocouple cable for heat resistance - Excellent heat resistance but cannot be used in humid or hot and humid
environments - IEC-KX-GG-Conductor specification-1P Option : Shield, Drain etc.. | 
| 
|
ㆍFR PVC thermocouple cable - It is highly moisture-proof and waterproof, so it is used in general places
without special regulations - IEC-KX-VV-Conductor specification-1P Option : Shield, Drain etc. | 
| 
|
ㆍMULTI PAIR FR PVC thermocouple cable - Multi thermocouple cable provides excellent shielding, affordable,
and used in a variety of environments - IEC-KX-VMDV-Conductor specification-1P Option : Shield, Drain etc. | 
|
RTD CABLE
RRTD and Thermocouple are the most representative temperature sensors. If Thermocouple uses a change in electromotive force according to temperature, RTD is a temperature measurement method using a change in resistance value. PT100Ω is the most commonly used, and a three-wire type is mainly used to compensate for resistance between wires.
YFS Type | Fluororesin+Copper braided | 
|
YFK Type | Fluororesin+Silicone | 
|
YGS Type | Glass fiber+Copper braided | 
|
YFSF Type | Fluororesin+Copper braided+Fluororesin | 
|
YGG Type | Glass fiber+Glass fiber | 
|
YFF Type | Fluororesin+Fluororesin | 
|
* For specifications other than those listed above, please contact our sales department.
FLUOROPOLYMER
PVC
SILICONE
GLASS
Structure
Outline
Thermocouple cable
Extension cable is a special wire used in the temperature measurement method of a thermocouple cable used by extending a wire made of the same material as a thermocouple to the measuring instrument terminal. In this case, since the thermocouple material is expensive, it requires a lot of cost to use it for a long time. Therefore, thermocouple cable made of relatively inexpensive materials with little error is needed, which is compensating cable.
In modern times, it is absolutely necessary to ensure economic feasibility with high efficiency by measuring and managing accurate temperatures, and to make the quality of products uniform and high-quality. In particular, it is widely used in all industrial sites that require heat management, from shipbuilding and automobiles to small boilers, in addition to various power plant facilities, process management of petrochemical plants, and steel smelters.
International color code by specification
Green(+)White(-) Green(Sheath)
Yellow(+) Red(-) Yellow(Sheath)
Red(+) White(-) Blue(Sheath)
Green(+) White(-) Green(Sheath)
Red(+) White(-) Blue(Sheath)
Green(Sheath)
Red(+) White(-) Blue(Sheath)
Black(+) White(-)
Brown(Sheath)
White(+) Red(-) Black(Sheath)
Red(+) White(-) Yellow(Sheath)
Brown(+) White(-)
Brown(Sheath)
Blue(+) Red(-) Blue(Sheath)
Red(+) White(-) Brown(Sheath)
Violet(+) White(-) Violet(Sheath)
Violet(+) Red(-) Violet(Sheath)
Red(+) White(-) Violet(Sheath)
Copper
Copper-
Nickel alloy
Orange(+) White(-) Orange(Sheath)
Black(+) Red(-) Green(Sheath)
Red(+) White(-) Black(Sheath)
Orange(+) White(-) Orange(Sheath)
Red(+) White(-) Black(Sheath)
Copper-
Nickel alloy
Orange(+) White(-) Orange(Sheath)
Black(+) Red(-) Green(Sheath)
Red(+) White(-) Black(Sheath)
Orange(+) White(-) Orange(Sheath)
Red(+) White(-) Black(Sheath)
Gray(+)White(-)
Gray(Sheath)
Gray(+) Red(-) Gray(Sheath)
Red(+) White(-) Gray(Sheath)
Pink(+) White(-)Pink(Sheath)
Orange(+) Red(-) Orange(Sheath)
Copper- Nickel alloy
Copper- Nickel
alloy
Pink(+) White(-) Pink(Sheath)
* Note. All of our products are produced and managed in accordance with the international standard code and insulator usage regulations. Please contact our sales department for specifications other than the above products.
Characteristic table for each insulating material
*Option
ㆍCopper or SUS Braiding(Mechanical strength reinforcement)
ㆍAl-Mylar Tape shielding
ㆍDrain Wire(Earth)
Production range
Thermocouple cable by type
ㆍFEP, PFA thermocouple cable
- Used where heat resistance, chemical resistance, and water resistance are required
- IEC-KX-FF-Conductor specification-1P Option : Shield, Drain etc.
ㆍSilicone thermocouple cable for heat resistance
- Used where heat resistance, flexibility are required
- IEC-KX-KK-Conductor specification-1P Option : Shield, Drain etc.
- Excellent heat resistance but cannot be used in humid or hot and humid
environments
- IEC-KX-GG-Conductor specification-1P Option : Shield, Drain etc..
ㆍFR PVC thermocouple cable
- It is highly moisture-proof and waterproof, so it is used in general places
without special regulations
- IEC-KX-VV-Conductor specification-1P Option : Shield, Drain etc.
ㆍMULTI PAIR FR PVC thermocouple cable
- Multi thermocouple cable provides excellent shielding, affordable,
and used in a variety of environments
- IEC-KX-VMDV-Conductor specification-1P Option : Shield, Drain etc.
RTD CABLE
RRTD and Thermocouple are the most representative temperature sensors. If Thermocouple uses a change in electromotive force according to temperature, RTD is a temperature measurement method using a change in resistance value. PT100Ω is the most commonly used, and a three-wire type is mainly used to compensate for resistance between wires.
YFS Type
Fluororesin+Copper braided
YFK Type
Fluororesin+Silicone
Glass fiber+Copper braided
YFSF Type
Fluororesin+Copper braided+Fluororesin
YGG Type
Glass fiber+Glass fiber
YFF Type
Fluororesin+Fluororesin
* For specifications other than those listed above, please contact our sales department.
FLUOROPOLYMER
PVC
SILICONE
GLASS